How To: Remove Oil Filter Without Making A Huge Mess (You'll Love This Easy Tip!)

Here is what you volition demand (you tin can substitute many things for this list): (Links to Amazon)

  1. A Sharp Punch (Or a Screwdriver you tin hit with a hammer). I recommend this punch set (links to Amazon).
    • If you lot want to be super pro purchase this jump loaded dial (puncture oil filter without a hammer)
  2. A Nice Hammer (If you're in the market, I recommend this 5 Slice Set (links to Amazon)— awesome value!)
  3. Protective Gloves (Disposable Nitrile I like the nigh) Be sure to go a size that will fit you.

Tired of getting oil all down your arm when you remove the oil filter?

I don't know about you, but I was pretty fed up with how messy this ever seems to be. With this simple trick, your oil changes will exist way less messy and style more environmentally sound besides.

Turns out, there is a better way! No more than oil all over the underside of the motorcar and all down your arm.

In order to do this trick you volition demand some basic tools that you should have anyways.

If you don't have a good dial set, I recommend buying one for many unlike uses.

Also, you will need some type of hammer to drive the dial. Check the superlative of the article for links to products on Amazon I highly recommend having in your toolbox.

The Steps to a Mess Free Oil Filter Modify:

  1. First, loosen the oil filter a tiny bit (just to be sure you tin get it off). Leave it on tight enough that it isn't dripping oil.
  2. Grab your dial and puncture the oil filter so that it will bleed easily into your pan beneath.
  3. wait until it stops dripping into your catch pan and remove information technology (there may still be a little residual oil left in it).
  4. Dispose of it properly (take it to an machine shop for recycling).
  5. Enjoy your make clean hands and mess-free garage floor.

Watch these videos to come across it in action:

Thanks toMidwest Garage andEpicCowlick!

BASIC STEPS FOR AN OIL Change ON Any VEHICLE:

  1. Remove the oil filter fill cap under the hood. It lets the oil bleed out faster.
  2. Pause loose the oil pan drain plug commodities.
  3. Grab a suitable catch pain (make sure it tin hold enough– I accept had many overflows)
  4. Take the oil pan bleed plug bolt fully out, doing the last chip past hand (with gloves on). Once it is right most to come out I put force per unit area on the commodities, and remove it speedily so that the oil doesn't get all over me.
  5. Let oil drain, so reposition the oil pan catcher and then that when it is dripping it still catches it.
  6. Break the Oil Filter Loose (if done properly you lot should be able to do this past manus)
    • Do not fully remove information technology, only break it a quarter turn or half turn loose then you know information technology will come off.
    • Grab a punch and a hammer. (Use this spring loaded punch (Amazon link) to exist even cooler)
    • Puncture a hole in the lowest function of the Oil Filter and so that it volition bleed into your oil catcher pan.
    • You may have to put the drain plug dorsum in at this point so that yous tin reposition the pan over the oil filter.
    • Let oil filter drain into the pan.
    • Remove Oil Filter and dispose of properly (recycle it at the automobile parts store
  7. Grab Your New Oil Filter
    • Put fresh oil on the rubber seal of the new oil filter (helps create a skilful seal)
    • Reinstall and do not overtighten with a socket or anything. Simply become manus tight, and then a half turn more with a tiny bit of muscle. You lot volition get used to the feeling subsequently you do it a couple of times.
  8. Do a final tightening on Oil Pan Drain Plug Bolt.
    • Do non overtighten drain pan plug commodities. Look upward the torque spec for your vehicle if you experience unsure about this.
    • Optional: replace the oil pan bleed plug seal washer (cheap office, but you do non need to do this every oil change).
  9. Refill the car based on the guidelines in the owner'south manual. I usually get like a half quart less than what it says you need to add in the volume.
  10. Lower the automobile.
  11. Check to make sure no leaks, and Make SURE THE Car HAS OIL IN Information technology.
  12. Crank the car over a couple of times (non letting it beginning) to help it build oil pressure in the empty (new) oil filter.
  13. Start the machine and drive information technology to level ground
  14. Let it sit, bank check the oil, and add however information technology is topped off.
  15. Write down the mileage and engagement of when you lot changed the oil.
    • You can go to O'Reilly Auto Parts and ask them for some oil change stickers to put on your windshield (they're costless).
  16. Yous're DONE! Dispose of the oil properly and enjoy a non-messy oil change.
Spotter these videos if you're dislocated about how to change your oil:

Thanks for reading! Hope that makes your life easier and less messy.

For anyone interested in what I think are absolutely awesome oil change tools bank check out my recommendations (Links To Amazon):

  1. Oil Filter Strap Style Removal Tool
  2. Punch and Chisel Set
  3. Protective Gloves
  4. Big Engine Oil Drain Pain West/ Spout (this one is Awesome!)

Aforementioned products with photos:

Thanks for reading. If y'all want to learn how to make your own brake cleaner and penetrating oil click here.

DO Yous Similar THIS Article: